Guangzhou Sub-Group Auto Parts Co.,Ltd.
Professional, dedicated, attentive, Friends from all over the world, win-win is the original intention Do more cost-effective products
Add to Cart
NBR 200℃ Rubber Seal Ring
Large ship Sealing O ring Heat resistant anti-oxidation preservative Precision seal O rings
Product performance description
NBR O-rings
Size: AS568, ISO3601
Hardness: DURO 50~90 A, general 70/90 A
Color: general Black
Service temperature: -30°C~+120°C
Product usage introduction
Advantage
• They seal over a wide range of pressure, temperature and tolerance.
• Ease of service, no smearing or retightening.
• No critical torque on tightening, therefore unlikely to cause structural damage.
• O-rings normally require very little room and are light in weight.
• In many cases an O-ring can be reused, an advantage over non-elastic fl at seals and crush-type gaskets.
• The duration of life in the correct application corresponds to the normal aging period of the O-ring material.
• O-ring failure is normally gradual and easily identifi ed.
• Where differing amounts of compression effect the seal function (as with fl at gaskets), an O-ring is not effected because metal to metal contact is generally allowed for.
• They are cost-effective.
Engineering Machinery Industry
Rod seal, piston seal, wipers, buffer seal and guide ring are widely used in earth-moving engineering machinery, such as excavator, hammer.
Petroleum Industry
Spring Energized PTFE or PEEK seals are used in petroleum industry, such as Large bore/high pressure frac gate valve and X-mas tree in oilfield.
Hydraulic & Pneumatic Industry
PTFE, PU, NBR Seal can be used in hydraulic & pneumatic, such as hydraulic cylinder and air cylinder
Intelligent Manufacturing & New Energy
Spring Energized PTFE or PEEK seals are used in intelligent manufacturing & New Energy, such as robot industry, uuv.
| Product Name | O type ring seals |
| Material | NR, NBR, SBR, EPDM, IIR, CR, SILICONE,etc |
| Color | Black,white,Red, blue, green, yellow,all pantone colors and RAL colors |
| Business Scope | Rubber injection molding, Rubber transfer molding, Rubber compression molding, Rubber to metal molding, Custom rubber molding |
| Quality Control | ISO/TS16949:2002 and ISO14001:2004 system |
1. Analysis items: principal component analysis, map analysis, failure analysis, full component analysis, material identification, formula reduction, etc.
2. Physical and mechanical properties: density/specific gravity, hardness test, surface resistivity, tensile properties, impact properties, etc.;
3. Aging performance: ozone, ultraviolet aging, salt spray aging, xenon lamp aging, carbon arc lamp aging, halogen lamp aging, life estimation, etc.;
4. Liquid resistance: lubricant resistance, gasoline resistance, engine oil resistance, acid resistance, alkali resistance, organic solvent resistance, water resistance, etc.;
5. Combustion performance: fireproof and flame retardant, vertical burning, alcohol burner burning, roadway propane burning, smoke density, burning rate, etc.;
6. Applicable performance: hydraulic pressure resistance, impulse test, electrical conductivity, water tightness, air tightness, etc.